Author Topic: optimized sources (Read 615371 times)

_heinz · « **Reply #810 on:** 23 Apr 2012, 03:32:37 am »

special astropulse 6.01-build for ATOM-Processor
My long test run with a real astropulse wu ended today
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Quick timetable

WU : #ap_genwis.dat
ap_5.05r409_SSE.exe -verbose :
Elapsed 104.863 secs
CPU 101.026 secs
ap_5.05r468_SSE3_ATOM_IXE_MKLS_O3.exe -verbose :
Elapsed 8.455 secs, speedup: 91.94% ratio: 12.40x
CPU 3.994 secs, speedup: 96.05% ratio: 25.29x
ap_6.01r548_SSE_331_noAVX.exe -verbose :
Elapsed 98.888 secs, speedup: 5.70% ratio: 1.06x
CPU 95.785 secs, speedup: 5.19% ratio: 1.05x
ap_6.01r557_SSE3_ATOM_IXE_MKLS_O3.exe -verbose :
Elapsed 6.209 secs, speedup: 94.08% ratio: 16.89x
CPU 3.588 secs, speedup: 96.45% ratio: 28.16x
ap_6.01r557_SSE3_ATOM_IXE_MKLS_O3_libfftwf-3.3.1.exe -verbose :
Elapsed 104.192 secs, speedup: 0.64% ratio: 1.01x
CPU 100.277 secs, speedup: 0.74% ratio: 1.01x
ap_6.01r557_SSE3_ATOM_IXE12.1.2.278_MKLS10.3.8_O3.exe -verbose :
Elapsed 6.474 secs, speedup: 93.83% ratio: 16.20x
CPU 3.869 secs, speedup: 96.17% ratio: 26.11x

WU : ap_08mr07ag_B4_P1_00025_20100428_07060.wu
ap_5.05r409_SSE.exe -verbose :
Elapsed 245817.702 secs
CPU 239508.351 secs
ap_5.05r468_SSE3_ATOM_IXE_MKLS_O3.exe -verbose :
Elapsed 175379.443 secs, speedup: 28.65% ratio: 1.40x
CPU 173293.118 secs, speedup: 27.65% ratio: 1.38x
ap_6.01r548_SSE_331_noAVX.exe -verbose :
Elapsed 231145.730 secs, speedup: 5.97% ratio: 1.06x
CPU 230139.305 secs, speedup: 3.91% ratio: 1.04x
ap_6.01r557_SSE3_ATOM_IXE_MKLS_O3.exe -verbose :
Elapsed 220803.835 secs, speedup: 10.18% ratio: 1.11x
CPU 218619.209 secs, speedup: 8.72% ratio: 1.10x
ap_6.01r557_SSE3_ATOM_IXE_MKLS_O3_libfftwf-3.3.1.exe -verbose :
Elapsed 202800.952 secs, speedup: 17.50% ratio: 1.21x
CPU 201832.971 secs, speedup: 15.73% ratio: 1.19x
ap_6.01r557_SSE3_ATOM_IXE12.1.2.278_MKLS10.3.8_O3.exe -verbose :
Elapsed 173418.757 secs, speedup: 29.45% ratio: 1.42x
CPU 172586.200 secs, speedup: 27.94% ratio: 1.39x

======================================

Restoring BOINC to pretest state...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Against ap_5.05r486 we lost no speedup with the new ap_6.01r557
We can be happy with it.
Full test-result in our beta test area.

_heinz

_heinz · « **Reply #811 on:** 24 Apr 2012, 08:30:26 pm »

Today I installed CUDA 4.2 on my machines
Using BOINC 6.10.58

R3600
25.04.2012 03:21:53 NVIDIA GPU 0: ION (driver version 30132, CUDA version 4020, compute capability 1.1, 256MB, 35 GFLOPS peak)

P6630 Laptop i3, 2.6GHz
25.04.2012 10:04:05 NVIDIA GPU 0: GeForce GT 540M (driver version unknown, CUDA version 4020, compute capability 2.1, 1024MB, 205 GFLOPS peak)

v8-Xeon
25.04.2012 09:59:25 NVIDIA GPU 0: GeForce GTX 570 (driver version 30132, CUDA version 4020, compute capability 2.0, 1280MB, 1632 GFLOPS peak)
25.04.2012 09:59:25 NVIDIA GPU 1: GeForce GTX 470 (driver version 30132, CUDA version 4020, compute capability 2.0, 1280MB, 1398 GFLOPS peak)
25.04.2012 09:59:25 NVIDIA GPU 2: GeForce GTX 470 (driver version 30132, CUDA version 4020, compute capability 2.0, 1280MB, 1380 GFLOPS peak)

_heinz

_heinz · « **Reply #812 on:** 25 Apr 2012, 02:21:53 pm »

ATI - driver for HD4670 AGP 12-1_agp-hotfix_xp32_dd_cc

BOINC 7.0.25
30.04.2012 20:19:49 | | Processor: 1 GenuineIntel Intel(R) Pentium(R) 4 CPU 2.66GHz [Family 15 Model 2 Stepping 7]
30.04.2012 20:19:49 | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pbe
30.04.2012 20:19:49 | | OS: Microsoft Windows XP: Home x86 Edition, Service Pack 3, (05.01.2600.00)
30.04.2012 20:19:49 | | Memory: 1023.48 MB physical, 4.90 GB virtual
30.04.2012 20:19:49 | | Disk: 55.89 GB total, 16.03 GB free
30.04.2012 20:19:49 | | Local time is UTC +2 hours
30.04.2012 20:19:49 | | ATI GPU 0: ATI RV730 (CAL version 1.4.1664, 1024MB, 1012MB available, 960 GFLOPS peak)

works fine with primegrid, cpu-usage now down to 7- 10% (tpsieve_1.38)
the machine (P4 Northwood 2.6GHz) shows ~50% cpu usage total while crunching.
This shows: a single CPU can feed a Graphicadapter like HD4670 to crunch

25th april the machine had 2.250.000 pg-credit

_heinz

_heinz · « **Reply #813 on:** 30 Apr 2012, 10:53:37 am »

Its hot here in the Rhinvalley since 2 days, we had outdoortemperature over 30 grd C already
Roomtemp=25,8 grd celsius
GPU2_470_101_grd

All temps over 100 grd C makes me trouble with the hardware.
Looks like I need a watercooled solution....or a compressor-cooling like a refrigerator.

If temps are not going down a bit, then I must shutdown my crunchers.

_heinz

_heinz · « **Reply #814 on:** 03 May 2012, 11:01:52 am »

MSI announces:
N690GTX Dual GPU
N690GTX-P3D4GD5
3072 CUDA-Processors
4GB GDDR5, 6008MHz
(TDP) 300 Watt
max temp 98 grd C
10 years ultra long lifetime (under full load).

price in germany: 999,00 Euro

happy crunching
_heinz

_heinz · « **Reply #815 on:** 23 May 2012, 02:28:42 pm »

V8-Xeon is dead again.

14 days ago I shut down the machine to go to holidays. As I'm back I switched the power on and V8-Xeon did not start anymore. The light and the fans are on for a second and then off. On the display of the board is nothing shown. No selfest is starting. Looks like the machine eat a next PSU.....

_heinz

_heinz · « **Reply #816 on:** 19 Jun 2012, 05:59:58 pm »

Ordered now a PSU tester unit to see if PSU or board is dead.
Waiting...

_heinz · « **Reply #817 on:** 22 Jun 2012, 01:18:23 pm »

21th June my i3-laptop-gt540m got 7Mio_distrtgen

_heinz

_heinz · « **Reply #818 on:** 04 Jul 2012, 07:24:04 am »

4th of July a great day in Research at CERN,

Higgs within reach

Read the CERN Press Release

Austria-German Press articles
~~~~~~~~~~~~~~~~~~
Wir haben es

Physiker feiern Durchbruch

_heinz

_heinz · « **Reply #819 on:** 07 Jul 2012, 10:28:53 am »

Quote from: _heinz on 19 Jun 2012, 05:59:58 pm

Ordered now a PSU tester unit to see if PSU or board is dead.
Waiting...

PSU tester does not show anything, if I switch the power on, the display of PSU tester goes short on, then the PSU did switch the power automatic off. The PSU is definitely dead.

So I will looking for a new 1200W PSU in autumn. Now in the summer if temps are up 28 grd I can't run the air-cooled V8-Xeon.

By the way today my i3-laptop-gt540m passed 8Mio_distrtgen

_heinz

_heinz · « **Reply #820 on:** 12 Jul 2012, 03:43:21 pm »

Today I cleaned the PSU and had a closer look in it to see something.
PSU_open_cleaned

I found a overheated transformer.
PSU_transformer_E4220_defect
PSU_transformer_E4220_defect_closer_look

After all the cleaning I conneted the PSU-tester, if it shows something.
PSU_tester_connected

And really it shows something now, wow what a effect.
PSU_tester_shows_all_voltages

PSU tester says the PSU is OK.

Now I closed the PSU and set it back into V8-Xeon.
I switched the Power on and the machine runs till to the logon screen, then switched the power automatic off again. Pitty..
A next try to start the machine was not sucessful anymore.
Will order a new PSU now.

_heinz

_heinz · « **Reply #821 on:** 18 Jul 2012, 05:02:20 am »

More than 180 000 hits on this thread now
Thank You to all users still looking up here.

~~~~~~~~~~~~~~~~~~~~~~~~~~~
Although we are a bit out of the headline, I'm hoping you enjoy.
To running the hardware on its edge is a great challange.
I dont mention it, my P4 with AGP HIS4670 died also, PSU burnt out the third time.
So I have stiil my R3600 ATOM ION and my laptop i3 GT540M to crunch.
Looking and control the hardware is always necessary to run extremly.
I have seen latest GPU-Z 0.6.3 does not show CUDA on GT540M on my laptop.
I was also wondering about DirectCompute is not shown.
(Errorreport done)
http://www.britta-d.de/images/gtx540m/gt540m_gpuz_0.6.3_nocuda.jpg
Have a closer look with GPU Caps viewer on this GPU:
http://www.britta-d.de/images/gtx540m/gt540m_gpu.jpg
http://www.britta-d.de/images/gtx540m/gt540m_opengl.jpg
http://www.britta-d.de/images/gtx540m/gt540m_opencl.jpg
http://www.britta-d.de/images/gtx540m/gt540m_cuda.jpg

_heinz

_heinz · « **Reply #822 on:** 20 Jul 2012, 07:04:05 pm »

Quote from: _heinz on 23 May 2012, 02:28:42 pm

V8-Xeon is dead again.
14 days ago I shut down the machine to go to holidays. As I'm back I switched the power on and V8-Xeon did not start anymore. The light and the fans are on for a second and then off. On the display of the board is nothing shown. No selfest is starting. Looks like the machine eat a next PSU.....

_heinz

(a little late, but it is worth to tell and show picture)
As I opened the case I was really surprized about all the dust in it. Last cleaning was sill two a half months ago.
Have a closer look on the picture and you see dust ontop of the grapicadapters too, Its not light, its dust.
v8-xeon_dustbunnies
The most dust is on the wires before the first cpu cooling unit. I had to think about any effective air-filtersystem in the next future.
See you the small space between the graphicadapters, no wounder to get high temperatures, not enough air can come in.
This is not a masterpiece of engeneering, the graphicadapters must be smaller in the part where the fans are to let more air in.
Better I should run still two graphicadapters on this bordlayout.
I could increase the performance using two adapters with dual GPUs. Maybe a mixed configuration, one from NVIDIA the other from ATI.
One of the main-problems are the high temperatures of the FB-DIMM, you know I had already temps over 100 grd Celsius.
On the market I did not found really good freezers for the FB-DIMMs and a lot of memory coolers does not fit.
I got a KINGSTON HyperX RAM-Cooler 2x60mm blue , but it does not fit, it's too big.
I need a 50mm and still 5 mm high to fit under the clamp of the 12cm fan of the left CPU-cooler.
Looks like I must selfcunstruct something.

_heinz

_heinz · « **Reply #823 on:** 24 Jul 2012, 07:57:57 am »

Quote from: _heinz on 18 Jul 2012, 05:02:20 am

I dont mention it, my P4 with AGP HIS4670 died also, PSU burnt out the third time.

_heinz

Got the machine repaired after a general cleaning and demounting.

23.07.2012 22:11:41 | | ATI GPU 0: ATI RV730 (CAL version 1.4.1664, 1024MB, 1012MB available, 960 GFLOPS peak)
23.07.2012 22:11:41 | | OpenCL: ATI GPU 0: ATI RV730 (driver version CAL 1.4.1664, device version OpenCL 1.0 AMD-APP (851.4), 1024MB, 1012MB available)
~~~~~~~~~~~~~~~~~~~~~~
hd4670_AGP_GPUZ_graphicadapter
hd4670_AGP_GPUZ_crunching
We see a constant ~90% GPU-load and GPU-Temp ~66 grd celsius, Roomtemp 26,2 grd celsius.
Looks good, my working horse is running again.

_heinz

_heinz · « **Reply #824 on:** 10 Aug 2012, 02:44:36 pm »

10th august 2012, I got a new milestone with my small i3- laptop gt540m_10Mio_distrtgen

my comment to the FPGA:
The price is high, 1392 Euro for a PCI-Express-card with XILINX™ VIRTEX-4™ FPGA and 512 MByte SO-DIMM storage-modul
see this entry in my developer-book some years ago
Although if someone has access to all the hard and software it would be nice to have a seti application on a FPGA.
See FPGA thread

_heinz