x38g reports

[Jason G]

Cheers.  As long as we have some idea what went on with complete evident failure like that  .  The 560ti's market penetration, coupled with the large number running them on the knife edge without realising as such, has me considering ideas for monitoring/control.  We'll see.

Jason

[Next Day:]  For reference, moved x39e Diagnostic build to a special category

Cuda diagnostic Builds located under GPU apps in public downloads.

[perryjay]

Here's a nice one..  http://setiathome.berkeley.edu/workunit.php?wuid=772821765  All that time and then get screwed by a 4.43 client.      Oh well.


And then there's this one..  http://setiathome.berkeley.edu/workunit.php?wuid=778238977 -12s galore !!!!

[Jason G]

And then there's this one..  http://setiathome.berkeley.edu/workunit.php?wuid=778238977 -12s galore !!!!

hehehe, yeah all three stockers choked, oh well.

[perryjay]

Another invalid http://setiathome.berkeley.edu/workunit.php?wuid=781127263

[Jason G]

Another invalid http://setiathome.berkeley.edu/workunit.php?wuid=781127263

  Hmm, Stiffed on pulses, would be good to grab that one for an offline run as well & see if it was your fault.  Not a chance to look for it myself just now, if it's still there a bit later I will.

Jason

[Later:] A quick look I couldn't find it.  What are your average GPU temperatures ?

[perryjay]

Right now sitting at 69C. High seldom goes above 71C.

[perryjay]

One more invalid. http://setiathome.berkeley.edu/workunit.php?wuid=781608186  I found two pulses the other guys didn't.

[Mike]

One more invalid. http://setiathome.berkeley.edu/workunit.php?wuid=781608186  I found two pulses the other guys didn't.

Its on your end then perry.

One of the wingmen running 0.38g.

Still overclocked ?

[Jason G]

Still overclocked ?

Course he is, LoL.  I'm going to fit in temperature monitoring further into x40 series just for perryjay.... 

[perryjay]

Still over clocked but cut back from the 900/1800 to 883/1766. Temps haven't been a problem. I'm at 73 right now but usually lower than that. Still, that's well within limits.

[Jason G]

Still over clocked but cut back from the 900/1800 to 883/1766. Temps haven't been a problem. I'm at 73 right now but usually lower than that. Still, that's well within limits.

How's it hold up under OCCT 1 hour artefact scan at max complexity ?

[perryjay]

Okay Aussie, what's that in English?     I'll have to google for OCCT whatsit scan and get back to you.



Ewwww, pretty, how do I work it? I guess I'll have to shut down BOINC while I run it huh? Okay, off to try to figure out how I can break it.

[Jason G]

Okay Aussie, what's that in English?     I'll have to google for OCCT whatsit scan and get back to you.

http://www.ocbase.com/perestroika_en/index.php?Download

[Edit:] Here's the settings to use... Don't forget to abort if it starts to get really hot 

[perryjay]

Figures you would come up with a different one than I found. I downloaded the one from EVGA.   http://www.evga.com/articles/00530/Default.asp   I'll try running it first then go get yours.

[Jason G]

Similar purpose/usefulness. OCCT on max complexity just seems more hardcore to me..