+- +-
Say hello if visiting :) by Gecko
11 Jan 2023, 07:43:05 pm

Seti is down again by Mike
09 Aug 2017, 10:02:44 am

Some considerations regarding OpenCL MultiBeam app tuning from algorithm view by Raistmer
11 Dec 2016, 06:30:56 am

Loading APU to the limit: performance considerations by Mike
05 Nov 2016, 06:49:26 am

Better sleep on Windows - new round by Raistmer
26 Aug 2016, 02:02:31 pm

Author Topic: Getting Started  (Read 10894 times)

Dlanor

  • Guest
Getting Started
« on: 13 Mar 2009, 08:08:01 am »
Hi All,

I've been processing seti since 1999 and have only just become aware of optimised apps.  :-[

I'm complete newbie here, and i'm sorry if i've missed a relevant thread somewhere else.

I've read through alot of threads in the forum but most of it is way over my head, so any help it getting started would be appreciated.

I would like to be able to run enhanced, astropuls and astropulse v5. Below is a report of my current system running XP Pro SP3 (32 bit)

-------------------------
  CPU-Z version 1.50
-------------------------

Processor 1 (ID = 0)
Number of cores      2 (max 2)
Number of threads   2 (max 2)
Name         AMD Athlon 64 X2 5000B
Codename      
Specification      AMD Athlon(tm) Dual Core Processor 5050e
Package         Socket AM2 (940)
CPUID         F.B.2
Extended CPUID      F.6B
Brand ID      7
Core Stepping      DH-G2
Technology      65 nm
Core Speed      2600.4 MHz (13.0 x 200.0 MHz)
HT Link speed      1000.2 MHz
Stock frequency      2600 MHz
Instructions sets   MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache      2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache   2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache      2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control      yes
max FID         13.0x
max VID         1.250 V
Features      XD, VT
K8 Thermal sensor   yes
K8 Revision ID      6.0
Attached device      PCI device at bus 0, device 24, function 0
Attached device      PCI device at bus 0, device 24, function 1
Attached device      PCI device at bus 0, device 24, function 2
Attached device      PCI device at bus 0, device 24, function 3



Chipset
------------------------------------------------------------------------------

Northbridge      NVIDIA nForce 560 rev. A2
Southbridge      NVIDIA nForce 630a rev. A2
Graphic Interface   PCI-Express
PCI-E Link Width   x16
PCI-E Max Link Width   x16
Memory Type      DDR2
Memory Size      4096 MBytes
Channels      Dual
Memory Frequency   371.5 MHz (CPU/7)
CAS#         5.0
RAS# to CAS#      5
RAS# Precharge      5
Cycle Time (tRAS)   18
Bank Cycle Time (tRC)   24
Command Rate      2T


I've also got a Nvidia 9600GSO graphics card

BOINC start up messages

  Starting BOINC client version 6.4.5 for windows_intelx86
  log flags: task, file_xfer, sched_ops
  Libraries: libcurl/7.19.0 OpenSSL/0.9.8i zlib/1.2.3
  Data directory: E:\boinc-data
  Running under account Ron
  Processor: 2 AuthenticAMD AMD Athlon(tm) Dual Core Processor 5050e [x86 Family 15 Model 107 Stepping 2]
  Processor features: fpu tsc pae nx sse sse2 3dnow mmx
  OS: Microsoft Windows XP: Professional x86 Editon, Service Pack 3, (05.01.2600.00)
  Memory: 3.00 GB physical, 6.83 GB virtual
  Disk: 74.53 GB total, 73.36 GB free
  Local time is UTC +0 hours
  Not using a proxy
  CUDA devices found
  Coprocessor: GeForce 9600 GSO (1)
  Einstein@Home URL: http://einstein.phys.uwm.edu/
  SETI@home URL: http://setiathome.berkeley.edu/
  General prefs: from SETI@home
  Computer location: home
  General prefs: using separate prefs for home
  Reading preferences override file
  Preferences limit memory usage when active to 2149.86MB
  Preferences limit memory usage when idle to 3009.81MB
  Preferences limit disk usage to 10.00GB

CPU-Z reports me SSE3 but BOINC SSE2

I've downloaded an app_info.xml file and an app from the downloads section, but i'm not sure if it's the correct one (ap_Win32_5.03r112_5.00r103_SSE3.7z) and what to do with it.

What's the 7z extension?
Does it need compiling?
Do i put them into my E:\boinc-data\projects\seti folder?

Many thanks

Ron

Offline arkayn

  • Janitor o' the Board
  • Knight who says 'Ni!'
  • *****
  • Posts: 1230
  • Aaaarrrrgggghhhh
    • My Little Place On The Internet
Re: Getting Started
« Reply #1 on: 13 Mar 2009, 08:40:39 am »
7z stands for 7-zip and it can be downloaded from http://www.7-zip.org/download.html

Try this one as it has all 3 optimized apps included SSE3 AKv8, AP5 r103 & APv5 r112

No compiling needed, just drop the files in the Files to Install folder to  E:\boinc-data\projects\setiathome.berkeley.edu

Dlanor

  • Guest
Re: Getting Started
« Reply #2 on: 13 Mar 2009, 08:54:05 am »
arkayn ,

i'll give it a go after work tonight, and let you know what happens.

Many thanks

Ron

Offline Claggy

  • Alpha Tester
  • Knight who says 'Ni!'
  • ***
  • Posts: 3111
    • My computers at Seti Beta
Re: Getting Started
« Reply #3 on: 13 Mar 2009, 08:55:15 am »
7z stands for 7-zip and it can be downloaded from http://www.7-zip.org/download.html

Try this one as it has all 3 optimized apps included SSE3 AKv8, AP5 r103 & APv5 r112

No compiling needed, just drop the files in the Files to Install folder to  E:\boinc-data\projects\setiathome.berkeley.edu

And if you want the 9600GSO to Crunch Cuda Multibeam instead of the CPU, you can use the app_info and files from this thread,
the app_info is for SSE3 astropulse, SSE3 astropulse_v5 and the stock Cuda app, or you could splice in Raistmer's v7 or v10 app instead of the stock app.

Claggy

Dlanor

  • Guest
Re: Getting Started
« Reply #4 on: 13 Mar 2009, 09:31:01 am »
claggy,

Doesn't boinc automatically use my GPU?

I've downloaded the 4 files. Do i replace the app-info file included in the "SSE3 AKv8, AP5 r103 & APv5 r112" download with the one in your other thread?

Quote
or you could splice in Raistmer's v7 or v10 app instead of the stock app.
??

??? Sorry that's way over my head at the moment. It looks like i'm on a steep learning curve here.  :o

thanks for your patience.

Ron


Offline Claggy

  • Alpha Tester
  • Knight who says 'Ni!'
  • ***
  • Posts: 3111
    • My computers at Seti Beta
Re: Getting Started
« Reply #5 on: 13 Mar 2009, 09:58:02 am »
claggy,

Doesn't boinc automatically use my GPU?

I've downloaded the 4 files. Do i replace the app-info file included in the "SSE3 AKv8, AP5 r103 & APv5 r112" download with the one in your other thread?

Quote
or you could splice in Raistmer's v7 or v10 app instead of the stock app.
??

??? Sorry that's way over my head at the moment. It looks like i'm on a steep learning curve here.  :o

thanks for your patience.

Ron



Yes Boinc will automatically use a GPU when running stock (ie without an app_info.xml), But if you use Boinc with an app_info you need all the apps referenced in it,
If you didn't have the Cuda app in it, and had the AK_V8 instead then Multibeam work would be done with that instead, on the CPU and slower, and if there wasn't a reference for Multibeam then it wouldn't do it at all.
Just shut down Boinc, put the 4 files, and the two Astropulse apps (from the package) and swap the app_info.xml (with the one in the other thread) in your setiathome folder, and you'll need the cc_config.xml file as well, this goes in your BoincData folder,
then start up Boinc again.

<cc_config>
<options>
<ncpus>3</ncpus>
</options>
</cc_config>

Claggy
« Last Edit: 13 Mar 2009, 10:08:40 am by Claggy »

Dlanor

  • Guest
Re: Getting Started
« Reply #6 on: 13 Mar 2009, 02:54:52 pm »
Claggy,

The apps suggested by arkayn seem to be working OK.  ;D

I'll give yours a go after i've had my tea and a kip, It's been along day.

I thank both of you for your help.

Ron

Dlanor

  • Guest
Re: Getting Started
« Reply #7 on: 14 Mar 2009, 04:43:01 am »
Everything seems to be working OK with the new apps, although i seem to be running two astropulses and an einstein on 2 cores, one of which (einstein) didn't seem to be progressing. I've set "no new tasks" on both accounts, and suspended all but two of the tasks. I assume this is because i have set 3 cpu's in the cc_config and there is nothing to run on the gpu. I can cope with handling that manually.

Many thanks for all the help.

Ron


 

 

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?
Members
Total Members: 97
Latest: ToeBee
New This Month: 0
New This Week: 0
New Today: 0
Stats
Total Posts: 59559
Total Topics: 1672
Most Online Today: 355
Most Online Ever: 983
(20 Jan 2020, 03:17:55 pm)
Users Online
Members: 0
Guests: 120
Total: 120
Powered by EzPortal