Forum > Linux

Help installing CUDA version

<< < (4/6) > >>

Richard Haselgrove:
Linux without any app_info.xml file won't get you any CUDA work - there's no stock Linux CUDA build.

But no rush to install the Lunatics build - SETI seems to have gone off the air, and I doubt anyone will be getting anything until the lab opens in three hours' time.

sunu:

--- Quote from: Richard Haselgrove on 04 Nov 2009, 08:52:04 am ---Linux without any app_info.xml file won't get you any CUDA work - there's no stock Linux CUDA build.

--- End quote ---

Yes in the picture you posted with messages from boinc start there weren't any messages about app_info.xml and anonymous platform. jim2006193, can you post here your app_info.xml? Do you use one?

Richard Haselgrove:
If he is, it's in the wrong place - there's no

2009-10-31 16:01:02 [SETI@home] Found app_info.xml; using anonymous platform

line in his startup graphic

jim2006193:

--- Code: ---<app_info>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</name>
<executable/>
</file_info>
<file_info>
<name>libcudart.so.2</name>
<executable/>
</file_info>
<file_info>
<name>libcufft.so.2</name>
<executable/>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>528</version_num>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libcudart.so.2</file_name>
</file_ref>
<file_ref>
<file_name>libcufft.so.2</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>603</version_num>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libcudart.so.2</file_name>
</file_ref>
<file_ref>
<file_name>libcufft.so.2</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>605</version_num>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libcudart.so.2</file_name>
</file_ref>
<file_ref>
<file_name>libcufft.so.2</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>606</version_num>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libcudart.so.2</file_name>
</file_ref>
<file_ref>
<file_name>libcufft.so.2</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>608</version_num>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>setiathome-CUDA-6.08.x86_64-pc-linux-gnu</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libcudart.so.2</file_name>
</file_ref>
<file_ref>
<file_name>libcufft.so.2</file_name>
</file_ref>
</app_version>
</app_info>


--- End code ---

sunu:
Not correct and too much redundant stuff. Use the one I'm attaching below. app_info.xml goes to the /projects/setiathome.berkeley.edu directory, that is where all the workunits are.

Also go to http://calbe.dw70.de/linux64.html and get "AK V8 Linux 64 SSSE3 INTEL only". Extract the executable and put it in /projects/setiathome.berkeley.edu directory.
Then go to http://calbe.dw70.de/mb/viewtopic.php?f=9&t=116 and get "setiathome-CUDA_2.2_6.08.x86_64_vlarkill". Extract the executable and put it in /projects/setiathome.berkeley.edu directory.
Copy again from cuda toolkit

libcudart.so
libcudart.so.2
libcudart.so.2.3
libcufft.so
libcufft.so.2
libcufft.so.2.3

to /projects/setiathome.berkeley.edu directory.

From Boinc manager go to Advanced, Preferences and push the Clear button.

Now boinc should be running ok.

[attachment deleted by admin]

Navigation

[0] Message Index

[#] Next page

[*] Previous page