upgrading to cuda libraries 2.3

[s52d]

While my slackware 64 works fine, I would like to upgrade to faster libraries.
It took me awhile to get it working, so I am a bit scared (and not much time to experiment).

Would it be enoug to:
grab toolkit and copy only lib64 libraries to /usr/lib64
- and copy them to boinc directories over old libraries as well?

then do new cudadriver on top of it?

BR, 73
Iztok

libraries in lib64 directory of  cudatoolkit_2.3_linux_64_rhel5.3.run
-rwxr-xr-x 1 iztok users  1508896 2009-08-15 11:32 libcufftemu.so.2.3*
-rwxr-xr-x 1 iztok users  8714504 2009-08-15 11:32 libcufft.so.2.3*
-rwxr-xr-x 1 iztok users   260840 2009-08-15 11:32 libcudart.so.2.3*
-rwxr-xr-x 1 iztok users  5067736 2009-08-15 11:32 libcublasemu.so.2.3*
-rwxr-xr-x 1 iztok users 15608280 2009-08-15 11:32 libcublas.so.2.3*

driver file: cudadriver_2.3_linux_64_190.18.run

[sunu]

Yes, you'll need a cuda 2.3 capable driver to go along with the 2.3 libs. 190.18 is ok.

For proper cuda installation for seti@home see my post here and follow it carefully.

If you use multiple gpus you'll have to use 6.6.11 or try compiling boinc from source.

[s52d]

OK, I did it.

1. new libraries to /usr/lib64 and /home/boinc/boinc also /home/boinc/boinc/projects/setiathome.berkeley.edu
2. ldconfig (and fix few sibolic links)
3. stop X (should be done as step 0, of course)
4. install new nvidia driver
5. startx
6. start boinc

Works - let me see, if it validates. But mostly, if it works then it validates.
cuda task is taking some 10% of one CPU with GTX 260 and Q6600.

Thanks,
Iztok

partially old/partial new: validated.
fist fully new libraries, http://setiweb.ssl.berkeley.edu/result.php?resultid=1317693933
96 seconds for 120 claimed credits, wow!

[sunu]

You could also try a bit newer cuda app from this thread (about mid point, setiathome-CUDA_2.2_6.08.x86_64_vlarkill).

If you do this, change accordingly your app_info.xml as the new client has a different name and also DON'T FORGET STEP 4 FROM MY POST I LINKED ABOVE.