Forum > Windows

optimized sources

<< < (152/179) > >>

_heinz:
v8-Xeon, 3 GPU's under full load
no cpu-work running, I have no fitting RAM heatsink at the moment
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Informationsliste   Wert
Sensor Eigenschaften   
Sensortyp   Dual ADT7490  (SMBus 2Ch, 2Eh)
GPU Sensortyp   Analog Devices ADT7473  (NV-I2C 2Eh)
Motherboard Name   Intel D5400XS
   
Temperaturen   
CPU1   39 °C  (102 °F)
CPU2   60 °C  (140 °F)
1. CPU / 1. Kern   40 °C  (104 °F)
1. CPU / 2. Kern   22 °C  (72 °F)
1. CPU / 3. Kern   37 °C  (99 °F)
1. CPU / 4. Kern   34 °C  (93 °F)
2. CPU / 1. Kern   29 °C  (84 °F)
2. CPU / 2. Kern   25 °C  (77 °F)
2. CPU / 3. Kern   29 °C  (84 °F)
2. CPU / 4. Kern   29 °C  (84 °F)
DIMM   72 °C  (162 °F)
GPU1: GPU Diode   88 °C  (190 °F)
GPU2: Grafikprozessor (GPU)   91 °C  (196 °F)
GPU2: GPU Diode   88 °C  (190 °F)
GPU2: GPU Speicher   87 °C  (189 °F)
GPU2: GPU Umgebung   66 °C  (151 °F)
GPU3: Grafikprozessor (GPU)   91 °C  (196 °F)
GPU3: GPU Diode   88 °C  (190 °F)
GPU3: GPU Speicher   87 °C  (189 °F)
GPU3: GPU Umgebung   67 °C  (153 °F)
Temperatur 1   36 °C  (97 °F)
Temperatur 2   48 °C  (118 °F)
Temperatur 3   46 °C  (115 °F)
FB-DIMM1   79 °C  (174 °F)
FB-DIMM2   84 °C  (183 °F)
FB-DIMM3   74 °C  (165 °F)
FB-DIMM4   69 °C  (156 °F)
ST31000340NS   34 °C  (93 °F)
   
Kühllüfter   
CPU1   604 RPM
CPU2   597 RPM
North Bridge   2784 RPM
South Bridge   4526 RPM
Aux   608 RPM
GPU1   3120 RPM  (74%)
GPU2   5013 RPM  (89%)
GPU3   3308 RPM  (71%)
   
Spannungswerte   
CPU1 Kern   1.125 V
CPU2 Kern   1.137 V
+1.5 V   1.536 V
+3.3 V   3.352 V
+5 V   5.125 V
+12 V   12.188 V
FSB VTT   1.211 V
North Bridge Kern   1.250 V
DIMM   1.823 V
GPU1: GPU Kern   0.975 V
GPU1: GPU +12V   12.063 V
GPU1: GPU VRM   0.938 V
GPU2: GPU Kern   0.912 V
GPU2: GPU Vcc   3.364 V
GPU3: GPU Kern   0.962 V
GPU3: GPU Vcc   3.360 V
   
Strom Werte   
GPU1: GPU VRM   63.50 A
   
Leistungswerte   
GPU1: GPU VRM   59.50 W
~~~~~~~~~~~~~~~~~~~~~~~
seems the PSU can do it...
the middle GPU is problematic, not enough(still 2mm) space to get enough air
will see how long it does, before the driver crashes

_heinz:
it was a short time (1 hour) and driver crashes... :'(
must power off now

_heinz:
I run the new installer v0.39 on the V8-Xeon, But I can't get any work from seti, pitty.
With stock frequency all 3 GPU's are now running fine.
I set all 8 CPU's under 100% full load with other work.

heinz

_heinz:
Today I got some work from seti GPU and CPU. All are done now. One has  a -9 error, others looks OK, some are waiting to confirm
http://setiathome.berkeley.edu/results.php?userid=8071209

heinz

_heinz:
Last 24 hours I had have 2 driver crashes. On the FB-DIMMS I had have 100 grd Celsius, so I stopped work on any CPU. I need a new FB-DIMM-heatsink, the old is under repair/reclamation.
The GPU temps are GPU1=89 rpm=3360, GPU2=94 rpm=5400, GPU3=91 rpm=3360.
As you can see there is still 2-3mm space between the cards, really small to get enough could air.
V8_Xeon_2GTX470_570_inserted

heinz

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version