Forum > Windows
optimized sources
_heinz:
since yesterday the runtime from ap5.03 (ap_5.03r112_SSE3.exe) decrease from 15 hours to 10 hours.
in all these shorter wu's I see now: repetitive pulses: 30, percent blanked: 0.00
looks like the wu finished in this case.
hmmm....anything happened on the serverside ?
on 4th april I calculated 19 wu's, all finished around 10 hours.
have a look at my machine http://setiathome.berkeley.edu/result.php?resultid=1196217010
heinz
Josef W. Segur:
--- Quote from: _heinz on 04 Apr 2009, 07:18:03 pm ---since yesterday the runtime from ap5.03 (ap_5.03r112_SSE3.exe) decrease from 15 hours to 10 hours.
in all these shorter wu's I see now: repetitive pulses: 30, percent blanked: 0.00
looks like the wu finished in this case.
hmmm....anything happened on the serverside ?
on 4th april I calculated 19 wu's, all finished around 10 hours.
have a look at my machine http://setiathome.berkeley.edu/result.php?resultid=1196217010
heinz
--- End quote ---
Yep, "class Astropulse::T_ffa: total=4.37e+009, N=1" indicates the repetitive pulse limit was reached in the first short FFA, our mod stops doing FFAs when they aren't needed any more and saves a lot of crunch time.
You got a group of WUs from the ap_28dc08aa 'tape' which had too little noise to get above the remove_radar threshold, but enough to be detected by the repetitive pulse folding. Until there's a radiotelescope on the far side of Luna or some other place away from terrestrial noise, that's going to happen sometimes.
Joe
_heinz:
Joyeuses Paques
Happy Easter....Happy Spring 2009 !!
to you and yours.........
hugs
Heinz :)
_heinz:
Added a second 8GB FB-DIMM RAM Kit to the V8-Xeon.
Both kits are from Kingston and should be identical, first is assembled in USA, second in China.
My first original FB-DIMM RAM Kit
KVR800D2D4F5K2/8G
8 GB PC2-6400 CL5 ECC 240-Pin-DIMM Kit (2 pcs.)
Assembled in USA
ELP 9965422-009.A00LF 999
---------------------------------------------------------------------
My second FB-DIMM RAM Kit
KVR800D2D4F5K2/8G
8 GB PC2-6400 CL5 ECC 240-Pin-DIMM Kit (2 pcs.)
ELP Assembled in China
SS0192S 9965422-009.A01LF 4074
-----------------------------------------------------------------------
SLOT 1 Channel A DIMM 0: 4GB FBDIMM USA 9965422-009.A00LF
SLOT 2 Channel B DIMM 0: 4GB FBDIMM USA 9965422-009.A00LF
SLOT 3 Channel C DIMM 0: 4GB FBDIMM China 9965422-009.A01LF
SLOT 4 Channel D DIMM 0: 4GB FBDIMM China 9965422-009.A01LF
-----------------------------------------------------------------------
I found nothing in the install doku about pairing like (SLOT1 & SLOT3) (SLOT2 & SLOT4).
D5400XS Jumper 23 is BIOS Configuration
1-2 Normal
2-3 Configuration
no Jumper - Recovery
-----------------------------------------------------------
I shut down the machine, switched the electricity off, set the Jumper to 2-3 Configuration, set the new FB-DIMMs into SLOT3 and SLOT4, switched the electricity on, started the machine, it runs into setup and shows all 4 FBDIMMs and 16GB total RAM.
I looked through the entries, all normal and quitted with F10 save Yes.
The machine shows : Switch off electricity and set Jumper to Normal (1-2)
I have done so.
OK.
Switch electricity on, Start the machine, it starts Vista64, OK
Vista64 shows in Systeminformation:
Betriebssystemname Microsoft® Windows Vista™ Ultimate
Version 6.0.6001 Service Pack 1 Build 6001
Zusätzliche Betriebssystembeschreibung Nicht verfügbar
Betriebssystemhersteller Microsoft Corporation
Systemname V8-SK01
Systemhersteller INTEL_
Systemmodell D5400XS_
Systemtyp x64-basierter PC
Prozessor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 2398 MHz, 4 Kern(e), 4 logische(r) Prozessor(en)
Prozessor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 2398 MHz, 4 Kern(e), 4 logische(r) Prozessor(en)
BIOS-Version/-Datum Intel Corp. XS54010J.86A.1175.2008.1121.1010, 21.11.2008
SMBIOS-Version 2.4
...
...
Installierter physikalischer Speicher (RAM) 16,0 GB
Gesamter realer Speicher 4,00 GB
Verfügbarer realer Speicher 5,71 GB
Gesamter virtueller Speicher 16,0 GB
Verfügbarer virtueller Speicher 13,7 GB
Größe der Auslagerungsdatei 8,29 GB
Auslagerungsdatei C:\pagefile.sys
-----------------------------------------------------------------------------------------------------
So we can assume Vista64 knows 16 GB RAM.
Now the Problem:
Some other installed Programms on Vista show still 8 GB of RAM (VMWare Server 2.0, Sideboard CPU usage shows 29% same as I have still 8GB, BOINC seti shows still 8GB, and Everest Ultimate shows still 8 GB)
---------------------------------------------------------------------------------------------------------------
I use EVEREST v5.01.1700 (latest version) --> http://www.lavalys.com/
Everest Ultimate Motherboard --> Speicher
Informationsliste Wert
Physikalischer Speicher
Gesamt 8188 MB
Belegt 2353 MB
Frei 5834 MB
Auslastung 29 %
Auslagerungsdatei
Gesamt 16428 MB
Belegt 2453 MB
Frei 13974 MB
Auslastung 15 %
Virtueller Speicher
Gesamt 24616 MB
Belegt 4807 MB
Frei 19809 MB
Auslastung 20 %
Auslagerungsdatei
Auslagerungsdatei C:\pagefile.sys
Momentane Größe 8488 MB
Physical Address Extension (PAE)
Vom Betriebssystem unterstützt Ja
Von der CPU unterstützt Ja
Aktiv Ja
-----------------------------------------------------------------------------------------------
Informationsliste Wert
Motherboard
CPU Typ 2x QuadCore Intel Xeon E5405, 2400 MHz (6 x 400)
Motherboard Name Intel Skulltrail D5400XS (2 PCI, 4 PCI-E x16, 4 FB-DIMM, Audio, Gigabit LAN)
Motherboard Chipsatz Intel Seaburg 5400B
Arbeitsspeicher 8188 MB (DDR2-800 Fully Buffered ECC DDR2 SDRAM)
Channel0-DIMM1: Kingston 4 GB DDR2-800 ECC DDR2 SDRAM FB-DIMM (4-4-4-15 @ 320 MHz) (5-5-5-18 @ 400 MHz)
Channel1-DIMM1: Kingston 4 GB DDR2-800 ECC DDR2 SDRAM FB-DIMM (4-4-4-15 @ 320 MHz) (5-5-5-18 @ 400 MHz)
BIOS Typ Intel (11/21/08)
--------------------------------------------------------------------------------------
if I look with EVEREST at Sensors:
FB-DIMM1 80 °C (176 °F)
FB-DIMM2 75 °C (167 °F)
FB-DIMM3 64 °C (147 °F)
FB-DIMM4 62 °C (144 °F)
it shows the temps of all 4 FB-DIMMs
hmmm....
If I start the machine new (jumper 23 in Normal position, then press F2 to look into the Bios still 8GB are shown. :'(
any ideas, why the RAM is not shown in full size ?
I set Jumper 23 to 2-3 Configuration, it shows again 16 GB.
Your hints are welcome
modify: 2 days later
I got all 16 GB runing, after disable OC.
Now I OCed the machine again, it runs with same speed as before but RAM is configured automatic. ;D
heinz
_heinz:
19 _heinz 16,803.26 2,089,656
Today I get a RAC of 16803 running our optimized astropulse 5.03. ;)
modify:
19 _heinz 17,106.68 2,102,178 ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version